Manufacturer of Hardened & Ground Bushes , Hardened & Ground Pins, Soft Big Machined Bushes, Sub Assemblies, Precision Machined Components, Earth Moving Equipment Spares, Flanges For Stamping Dies, S,S, Discs for Uni-Directional Valves, Slip-on Lock Nuts, New Development Parts.
We are manufacturers of Precision Machined Components and our setup is situated at Haveli, Pune ( Maharashtra, India ).
Hardened and Ground Bushes - Oil Groove Induction Harden Bush
| 1 | Raw Material | En 8D |
| 2 | Outer Diameter | 55.00 + 0.102/ + 0.121 |
| 3 | Inner Diameter | 45.085 + 0.025 mm |
| 4 | Total Length | 54.8 mm |
| 5 | Grooving Width | 5mm |
| 6 | Grooving Depth | 1.5mm |
| 7 | Surface Hardness | 55-60 HRC |
| 8 | Case Depth | 1.8 - 2.00 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Counter Diameter | 82.00mm |
| 2 | Outer Diameter | 50.00+0.102/+0.121 |
| 3 | Inner Diameter | 40.+075+0.025mm |
| 4 | Total Length | 47.5 mm |
| 5 | Grooving Width | 3mm |
| 6 | Grooving Depth | 1.2mm |
| 7 | Surface Hardness | 55-60 HRC |
| 8 | Case Depth | 1 - 1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Outer Diameter | 50.00+0.102/+0.121 |
| 3 | Inner Diameter | 40.+075+0.095mm |
| 4 | Total Length | 5mm |
| 5 | Grooving Width | 3mm |
| 6 | Grooving Depth | 1.5mm |
| 7 | Surface Hardness | 52-60 HRC |
| 8 | HRC Case Depth | 1,8 - 2.00mm |
| 1 | Raw Material | En 8D |
| 2 | Outer Diameter | 50.00+0.102/+0.121 |
| 3 | Inner Diameter | 45.+085+0.025mm |
| 4 | Total Length | 54.8mm |
| 5 | Drill Size | 5mm |
| 6 | Center Distance | 29.5 |
| 7 | Grooving Width | 5mm |
| 8 | Grooving Depth | 1.5mm |
| 9 | Surface Hardness | 52-60 HRC |
| 10 | Case Depth | 1-1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Outer Diameter | 60.00+0.102/+0.121 |
| 3 | Inner Diameter | 50.+090+0.023mm |
| 4 | Total Length | 35.8mm |
| 5 | Grooving Width | 5mm |
| 6 | Grooving Depth | 1.5mm |
| 7 | Surface Hardness | 52-60 HRC |
| 8 | Case Depth | 1-1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Counter Diameter | 84.00mm |
| 3 | Outer Diameter | 55.00+0.102/+0.121 |
| 4 | Inner Diameter | 45.+090+0.023mm |
| 5 | Total Length | 47.5mm |
| 6 | Grooving Width | 3mm |
| 7 | Grooving Depth | 1.2mm |
| 8 | Surface Hardness | 52-60 HRC |
| 9 | Case Depth | 1-1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Outer Diameter | 55.00+0.102/+0.121 |
| 3 | Inner Diameter | 45.+105+0.121mm |
| 4 | Total Length | 36 mm |
| 5 | Grooving Width | 3mm |
| 6 | Grooving Depth | 1.2mm |
| 7 | Surface Hardness | 52-60 HRC |
| 8 | Case Depth | 1-1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Outer Diameter | 75.00mm+0.102/+0.121 |
| 3 | Inner Diameter | 60+0.09+0.112mm |
| 4 | Total Length | 44.8mm |
| 5 | Grooving Width | 5mm |
| 6 | Grooving Depth | 1.5mm |
| 7 | Surface Hardness | 52-60 HRC |
| 8 | Case Depth | 1-1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Outer Diameter | 50.00mm+0.102/+0.121 |
| 3 | Inner Diameter | 40+0.09+0.023mm |
| 4 | Total Length | 39.8mm |
| 5 | Grooving Width | 5mm |
| 6 | Grooving Depth | 1.5mm |
| 7 | Surface Hardness | 52-60 HRC |
| 8 | Case Depth | 1-1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 2 | Counter Diameter | 72.00mm |
| 3 | Outer Diameter | 45.00+0.102/+0.121 |
| 4 | Inner Diameter | 35+0.09+0.023mm |
| 5 | Total Length | 39mm |
| 5 | Grooving Width | 3mm |
| 6 | Grooving Depth | 1.2mm |
| 7 | Surface Hardness | 52-60 HRC |
| 8 | Case Depth | 1-1.8 45 HRC |
| 1 | Raw Material | En 8D |
| 3 | Outer Diameter | 45.00+0.102/+0.121 |
| 3 | Inner Diameter | 35+0.09+0.023mm |
| 4 | Total Length | 29.8 mm |
| 5 | Grooving Width | 3mm |
| 6 | Grooving Depth | 1.2mm |
| 7 | Surface Hardness | 52-60 HRC |
| 8 | Case Depth | 1-1.8 45 HRC |
Hardened and Ground Bushes - Hardened Bushes
| 1 | Raw Material | 16 MnCr 5 |
| 3 | Outer Diameter | 73.96+ -0.02mm |
| 3 | Inner Diameter | 60.18+0.02mm |
| 4 | Total Length | 84.3+ / - 0.2mm |
| 5 | Grooving Width | R 6 |
| 6 | Drill Size | 5mm |
| 7 | Surface Hardness | 55-62 HRC |
| 8 | Case Depth | 0.6 to 0.7 |
| 9 | Surface Finish | Ra 0.8 MICRO MM |
| 1 | Raw Material | 16 MnCr 5 |
| 3 | Outer Diameter | 54.96+ /-0.02 |
| 3 | Inner Diameter | 45.25+0.02mm |
| 4 | Total Length | 104.5+ / - 0.2mm |
| 5 | Grooving Width | R 6 |
| 6 | Drill Size | 5mm |
| 7 | Surface Hardness | 55-60 HRC |
| 8 | Case Depth | 0.8 to 1mm |
| 9 | Surface Finish | Ra 0.8 MICRO MM |
| 1 | Raw Material | 16 MnCr 5 |
| 3 | Outer Diameter | 54.96+ /-0.02 |
| 3 | Inner Diameter | 51.17+/-0.02mm |
| 4 | Total Length | 69.8+ /- 0.2mm |
| 5 | Grooving Width | R 6 |
| 6 | Drill Size | 5mm |
| 7 | Surface Hardness | 55-60 HRC |
| 8 | Case Depth | 0.5 to 0.6 mm |
| 9 | Surface Finish | Ra 0.8 MICRO MM |
| 1 | Raw Material | 16 MnCr 5 |
| 3 | Outer Diameter | 85.98+ /-0.02 |
| 3 | Inner Diameter | 70.21+/-0.02mm |
| 4 | Total Length | 50+ /- 0.2mm |
| 5 | Surface Hardness | 55-62 HRC |
| 6 | Case Depth | 0.8 to 1 mm |
| 7 | Surface Finish | Ra 0.8 MICRO MM |
| 1 | Raw Material | M.S (MIN HIGH) |
| 3 | Outer Diameter | 80.15+ /-0.02 |
| 3 | Inner Diameter | 70.37+/-0.02mm |
| 4 | Total Length | 31.6+ /- 0.2mm |
| 5 | Surface Hardness | 55-62 HRC |
| 6 | Case Depth | 0.5 to 0.6 mm |
| 7 | Surface Finish | Ra 0.8 MICRO MM |
| 1 | Raw Material | 16 MnCr 5 |
| 3 | Outer Diameter | 69.98+ /-0.02 |
| 3 | Inner Diameter | 57.34+/-0.02mm |
| 4 | Total Length | 30+ /- 0.2mm |
| 5 | Surface Hardness | 55-62 HRC |
| 6 | Case Depth | 0.7 to 1 mm |
| 7 | Surface Finish | Ra 0.8 MICRO MM |
| 1 | Raw Material | 16 MnCr 5 |
| 3 | Outer Diameter | 57.13+ /-0.02 |
| 3 | Inner Diameter | 44.57+/-0.02mm |
| 4 | Total Length | 94+ /- 0.2mm |
| 5 | Surface Hardness | 55-62 HRC |
| 6 | Case Depth | 0.7 to 1 mm |
| 7 | Surface Finish | Ra 0.8 MICRO MM |
| 1 | Raw Material | 16 MnCr 5 |
| 3 | Outer Diameter | 57.13+ /-0.02 |
| 3 | Inner Diameter | 44.68+/-0.02mm |
| 4 | Total Length | 29+ /- 0.1mm |
| 5 | Surface Hardness | 55-62 HRC |
| 6 | Case Depth | 0.8 to 1.5 mm |
| 7 | Surface Finish | Ra 0.8 MICRO MM |
